Search Results: 2,873,547
Product Image
Category: VGA Accessories
$0.00
Category: Vinyl Records
$0.00
Category: Vinyl Records
$0.00
Category: Vinyl Records
Product Image
$0.00
Product Image
Category: Collections
$0.00
Category: Vinyl Records
$0.00
Category: Vinyl Records
$0.00
Category: Vinyl Records
Product Image
Add this item to your order to have a trained Lowe's associate assemble your item. Assembled items must be picked-up at a Lowe's location or delivered by a Lowes truck. We are unable to deliver assembled items via parcel courier.Each item requires its own assembly item be added to the cart.Please allow 24 hrs for assembly, you will receive a pick up notification e-mail when your assembled item is ready to be picked up.
Category: Lowe's Canada
Product Image
This sturdy external pole bracket bolts to the side structure of the dock to launch on site while allowing some movement caused by water level variations.<ul><li>All floating dock hardware in 5 gauge (1/4" nominal) hot dipped galvanized steel with 9/16" hole punches on 3-1/2" centres except where indicated</li><li>Made in Canada</li></ul>
$0.00
Category: Dock Hardware
Product Image
Hold chain up to 1/2" to secure the dock in position.<ul><li>1/4" (nominal) hot dip galvanized steel contruction</li><li>Universal hole placement fits 2" x 8" and over lumber</li><li>Holes designed for use with any 3-1/2", 4-1/2" or 5-1/2" bolt patterns</li></ul>
$0.00
Category: Dock Hardware
Product Image
24" rolling dock wheel, use for roll in docks or boat lifts.<ul><li>800lbs weight capacity per wheel</li><li>Tough polyethylene material offer stress, crack and impact resistance</li><li>Accept a 1-7/8" O.D. Axle</li><li>Made in Canada</li></ul>
$0.00
Category: Dock Hardware
Product Image
Connector hinge used to join dock sections or a fixed ramp to the dock at varying angles. Includes the hinge pin.<ul><li>3/16" Hot dip galvanized steel</li><li>Universal hole placement</li><li>Used to join dock sections or a ramp</li><li>Includes hinge pin</li></ul>
$0.00
Category: Dock Hardware
Product Image
This stationary dock base plate may be bolted to a 2" x 6" piece of lumber and joined to an adjacent base plate for stability.<ul><li>1/8" Hot dip galvanized steel</li><li>7/16" holes for 3/8" carriage bolts</li><li>Use with 1-7/8-inch pipe, equipped with bolt for tightening pipe</li></ul>
$0.00
Category: Dock Hardware
Product Image
The Wake Watcherâ?¢ boat mooring system allows your boat to move up and down with wakes and waves resisting vertical, horizontal and lateral movement while positioning your boat at a safe distance from the dock. This prevents damage to your boat.<ul><li>For boats up to 3500 lbs. Complete with adjustable tension for smaller boats and personal watercraft</li><li>Prevents damage from wind, wave and wake action</li><li>No line clutter on the dock</li><li>Corrosion and weather resistant</li><li>Engineered for safety and convenience</li></ul>
$0.00
Category: Dock Hardware
Product Image
These cast aluminum cleats are sand blasted to give a clean matte metallic finish.<ul><li>Each cleat is designed with an extra wide footprint for added strength</li><li>Each cleat has an enlarged counter-sunk hole for easy installation with a socket</li><li>Can be through bolted or lag bolted</li></ul>
$0.00
Category: Dock Hardware
Product Image
This floating inside corner kit includes 2 male and female T connectors, 2 connector pins and 4 backer plates. Use for all floating dock applications. Hardware is 1/4� nominal hot dipped galvanized steel, with 9/16� holes for 1/2� carriage bolts. Kit includes all hardware, bolts not included.<ul><li>Heavy duty hot dipped galvanized steel hardware</li><li>Includes 2 male and female T connectors, 5� x 5" x 1/4�</li><li>Includes 4 heavy duty backer plates, 5� x 5� x 1/4�</li><li>Instruction plan is included</li><li>For floating dock</li><li>Made in Canada</li></ul>
$0.00
Category: Dock Hardware
Product Image
This kit includes 2 heavy duty side leg holders and 4 backer plates. Use for all dock applications. The side leg holders accommodate up to 1-7/8� pipe. Hardware is 1/8� nominal hot dipped galvanized steel with 7/16" holes for 3/8� bolts. Kit includes all hardware, bolts not included.<ul><li>2 x heavy duty side leg holders 5" x 5" x 1/8"</li><li>4 Back plates: 5" x 5" x 1/8"</li><li>Kit has 7/16" holes. Mounting: 3/8" x 2-1/2" (not included)</li><li>Instruction plan is included</li><li>For stationary dock</li><li>Made in Canada</li></ul>
$0.00
Category: Dock Hardware
Product Image
This floating inside corner kit includes 4 heavy duty inside corners and 4 backer plates. Use for all floating dock applications. Hardware is 1/4� nominal hot dipped galvanized steel, with 9/16� holes for 1/2� carriage bolts. Kit includes all hardware, bolts not included.<ul><li>Heavy duty hot dipped galvanized steel hardware</li><li>Includes 4 heavy duty inside corners, 5� x 5" x 1/4�</li><li>Includes 4 heavy duty backer plates, 5� x 5� x 1/4�</li><li>Instruction plan is included</li><li>For floating dock</li><li>Made in Canada</li></ul>
$0.00
Category: Dock Hardware
© 2019 PriceFinder.ca | Last Update: 2019-02-21
0.044 sec